System Platform 2012 R2 Patch 03

Материал из archestra.info
Перейти к: навигация, поиск

ArchestrA System Platform 2012 R2 Patch 03 Installation Guide

Last revision: 09/17/2014

This document provides information about installing ArchestrA System Platform 2012 R2 Patch 03 using either the Patch Manager ultility or a silent installation.


Preparing to Install the Patch

It is important to prepare your system for patch installation before running the Patch Manager utility or installing silently.

Important

Product Compatibility: If you installed ArchestrA System Platform 2012 R2, or ArchestrA System Platform 2012 R2 Patch 01, or ArchestrA System Platform 2012 R2 Patch 02, then installed any Wonderware products that were released prior to the release of ArchestrA System Platform 2012 R2 or ArchestrA System Platform 2012 R2 Patch 01, or ArchestrA System Platform 2012 R2 Patch 02, you might be requested to supply the DVD or a network location of the ArchestrA System Platform 2012 R2 or ArchestrA System Platform 2012 R2 Patch 01 or ArchestrA System Platform 2012 R2 Patch 02 software in order to install this patch.

.NET Framework: Neither ArchestrA System Platform 2012 R2 nor ArchestrA System Platform 2012 R2 P03 support .NET Framework 4.5, but can be installed and can co-exist on a system that has .NET Framework 4.5 installed.

Custom Branding: The IDE watermark image file will be overwritten during the installation of ArchestrA System Platform 2012 R2 Patch 02. If you have created a custom branding image file, back it up so you can restore it later. The image file, typically a .png such as "IDEWatermark.png" can be found at C:\Program Files (x86)\Common Files\ArchestrA\ApplicationServer\3.6.000\Branding.

In this Patch Release: ArchestrA System Platform 2012 R2 P03 delivers the following patches:

  • InTouch 2012 R2 P02 (10.6.002)
  • Application Server 2012 R2 P03 (3.6.003)
  • Historian 2012 R2 P02 (11.0.001)
  • Wonderware Information Server 2012 R2 P01 (5.0.001)

Patch Conditions

Ensure that your system meets the following conditions for installing the patch:

  • Installation - ArchestrA System Platform 2012 R2 must be installed before installing this patch. If you have older versions of the products, they must first be upgraded to ArchestrA System Platform 2012 R2.
  • Coexistence - Install all available updates applicable to your system. If Wonderware Application Server and the InTouch HMI are installed on the same node, they both must be upgraded to Application Server 2012 R2 Patch 03 and InTouch HMI 2012 R2 Patch 02, respectively.

Before You Start

Close any anti-virus programs running on the computer before you update Wonderware Application Server with Patch 03.

Apply this patch to ArchestrA System Platform 2012 R2, ArchestrA System Platform 2012 R2 P01, or ArchestrA System Platform 2012 R2 P02, including InTouch 10.6 or 10.6.001 (all languages), Application Server 3.6 or 3.6.001, or 3.6.002, Historian 11.0 or 11.0.001, and Wonderware Information Server 5.0 or 5.0 Patch 01. You can verify the version number under Wonderware in Windows Control Panel, Add or Remove Programs or Programs and Features, depending on your operating system.

NOTE: The Wonderware Information Server (WIS) version number shown in Add/Remove Programs or Programs and Features, depending on your operating system, will not change after installing 2012 R2 Patch 02 or 2012 R2 Patch 03. These patches make no changes whatsoever to WIS 5.0 Patch 01.

If you are upgrading from WIS 5.0 (no patch), the patch won't change any core WIS components; however, it will modify a WIS add-on component. To confirm that the add-on has been updated, check that the file version of \Program Files (x86)\Common Files\ArchestrA\InformationModel\Bin\IMS.Server.Configurator.dll has been updated from 143.3.0.0 to 144.0.0.0.

Before Installing the InTouch 10.6 Patch 02 and Application Server 3.6 Patch 03:

  • Before installing the patch, ensure you have created known good backups of all installed Galaxies and InTouch applications. To create a backup of your Galaxy, access the Galaxy Database Manager in the System Management (SMC) console. Expand the Galaxy Database Manager and select the Galaxy. On the Action menu, click Backup. Follow the prompts to complete the backup operation for each Galaxy.
  • If the ArchestrA IDE connects remotely to the Galaxy Repository on another computer, apply Patch 03 to both nodes. A remote connection between the ArchestrA IDE and the Galaxy Repository fails if the nodes are at different versions of Wonderware Application Server.

  • NOTE: An ArchestrA IDE node still at version 3.6, 3.6 Patch 01, or 3.6 Patch 02 cannot connect to a remote GR node updated with Patch 03.
  • Before running the patch installer, undeploy the platform or stop the platform from Platform Manager in the SMC. Exit all running applications including the ArchestrA IDE, InTouch WindowMaker, InTouch WindowViewer, ArchestrA Log Viewer, and the System Management Console.
  • Before applying Patch 02 on the GR node, disconnect any active remote IDE sessions. Patch 02 requires ArchestrA-related processes to be shut down. The patch installation may require a reboot.

Before Installing the Historian 11.0 Patch 02:

  • Shut down and disable the Historian.
  • Close the System Management Console (SMC) if it is running.

Installing the ArchestrA System Platform 2012 R2 Patch 03

This section provides the steps to install the ArchestrA System Platform 2012 R2 Patch 03 using either the Patch Manager or a silent install.

Using the Patch Manager Utility

Do the following steps to install using the Patch Manager:

  1. Download the ASP2012R2_Patch03.exe file to a folder on the computer where ArchestrA System Platform 2012 R2 is installed.
  2. Double-click the ASP2012R2_Patch03.exe file to extract the patch files. The End User License Agreement (EULA) appears.
  3. Accept the License Agreement. The Patch Manager window appears.
    1. The Patch Manager displays a list of available patches, the associated product names, and patch status for each patch.
    2. Click a patch name to view the Readme file for that product.
    3. Select the check box for each patch you want to install
    4. Click the Install button. The patch Progress Window appears.
  4. A Status Window displays a list of installed patches. Click the link provided to view the log file. Click the Finish button.
    1. If you have installed the Wonderware Application Server patch, the Galaxy Patcher progress window appears, and the relevant Galaxies are patched.
    2. If you have installed the Wonderware Information Server patch, the Configurator appears. Configure any elements that are not yet configured.
  5. Reboot the machine if required.

Installing Silently

Do the following steps to install silently:

  1. Generate a response file.
  2. Run the silent install from the command line.

Generating the Response File for Silent Installation

  1. Run cmd.exe as an Administrator.
  2. Change the working directory to the folder which contains the "ASP2012R2_Patch03.exe".
  3. Run this command line: ASP2012R2_Patch03.exe /list /filename:c:\PatchCreation\response.txt.
  4. The response.txt file will appear in the c:\PatchCreation folder.
  5. Using a text editor, modify the response.txt file to keep only those patches which you want to install.

Running the Silent Install from the Command Line

  1. Run cmd.exe as an Administrator.
  2. Change the working directory to the folder where you downloaded the ASP2012R2_Patch03.exe file.
  3. Run the appropriate command line:
    1. If the response file is in the same folder as the patch install: ASP2012R2_Patch03.exe /Silent response.txt.
    2. If the response file is in a different folder than the patch install file, you must specify the path to the response file as part of the command line.
      Example: ASP2012R2_Patch03.exe /Silent "C:\PatchCreation\response.txt"
    3. If you do not want to automatically restart your computer after the silent installation completes, use the /Silentnoreboot option in the command line, then perform the system restart manually once all the patches are successfully applied.
      Example: ASP2012R2_Patch03.exe /Silentnoreboot "C:\PatchCreation\response.txt"


© 2014 Invensys Systems, Inc. All Rights Reserved.